Hardwood Flooring
Wood flooring is any product manufactured from timber that is designed for use as flooring, either structural or aesthetic. Bamboo flooring is often considered a wood floor, although it is not manufactured from timber, but a grass.
Types
Solid
Solid hardwood floors come in a wide range of dimensions and styles, with each plank made of solid wood and milled from a single piece of timber. Solid hardwood floors were originally used for structural purposes, being installed perpendicular to the wooden support beams of a building. Modern construction techniques now rarely use wood building frames and solid hardwood floors are used almost exclusively for their appearance.
For flooring, solid wood has many limitations due to the natural characteristics of wood. Expansion and contraction of wood from moisture and temperature fluctuation puts many dimensional restrictions on solid wood floors. Typically, 5" wide and 3/4" thick boards are the largest that can be manufactured from solid wood without compromising the structure of the flooring (some manufacturers produce wider boards using proprietary milling techniques). There is, however, no standard size which will perform well in every environment. For contemporary construction techniques, the most significant characteristic of solid wood floors is that they are not recommended to be installed directly over concrete.
Engineered
Engineered wood flooring is composed of two or more layers of wood in the form of a plank. The top layer (lamella) is the wood that is visible when the flooring is installed, and is adhered to the core (or substrate) which provides the stability.
Laminate, vinyl and veneer floors are often confused with engineered wood floors - laminate uses an image of wood on its surface, vinyl is plastic formed to look like wood, and veneer uses a thin layer of wood with a core that could be one of a number of different composite wood products (most commonly, high density fibreboard).
Engineered wood is the most common type of wood flooring used globally. North America is the only continent that has a larger solid wood market than engineered, although engineered wood is quickly catching up in market share.
Comparison of Solid Wood and Engineered Wood
It is very difficult to compare a solid wood floor to engineered wood floors, as there is a wide range of engineered wood floor qualities. There are several limitations on solid hardwood that give it a more limited scope of use: solid wood should not be installed directly over concrete, should not be installed below grade (basements) and it should not be used with radiant floor heating. Solid hardwood is also typically limited in plank width and is more prone to gapping and cupping with increased plank size. Solid wood products, on average, have a thicker 'sandable area' (the wood that is above the tongue), and can be installed using nails. Lastly, solid wood tends to be less expensive than engineered wood, but this, as with the 'sandable area,' depends on the quality of the engineered wood (most inexpensive engineered wood products are 'veneer' wood floors, and not 'engineered').
Engineered wood flooring has several benefits over solid wood, beyond dimensional stability and universal use. Patented installation systems (such as "click" or "G6") allows for faster installation, and easy replacement of boards. Engineered wood can use 'floating' installations, further increasing ease of repair and reducing installation times.
Solid Wood Manufacturing
Solid wood can be cut in three styles: flat-sawn, quarter-sawn, and rift-sawn. However, because only one side of the wood is visible on flooring, "quarter-sawn" and "rift-sawn" will have the same appearance.
Many solid woods come with "absorption strips" - grooves cut into the back of the wood that run the length of each plank. They are used to reduce cupping.
Solid wood floors are mostly manufactured with a tongue-and-groove for installation.
Engineered Wood Manufacturing
Lamella
The lamella is the face layer of the wood that is visible when installed. Typically it is a sawn piece of timber.
The timber can be cut in three different styles: flat-sawn, quarter-sawn, and rift-sawn. However, because only one side of the wood is visible on flooring, "quarter-sawn" and "rift-sawn" will have the same appearance.
The Core / Substrate
1) Wood ply construction ("sandwich core"): Uses multiple thin plies of wood adhered together. The wood grain of each ply runs perpendicular to the ply below it. Stability is attained from using thin layers of wood that have little to no reaction to climatic change. The wood is further stabilized due to equal pressure being exerted lengthwise and widthwise from the plies running perpendicular to each other.
2) Finger core construction: Finger core engineered wood floors are made of small pieces of milled timber that run perpendicular to the top layer (lamella) of wood. They can be 2-ply or 3-ply, depending on their intended use. If it is three ply, the third ply is often plywood that runs parallel to the lamella. Stability is gained through the grains running perpendicular to each other, and the expansion and contraction of wood is reduced and relegated to the middle ply, stopping the floor from gapping or cupping.
3) Fibreboard: The core is made up of medium or high density fibreboard. Fibreboard has minimal expansion and contraction so the core is very stable. Due to the softer nature of fibreboard, wood floors with a thin lamella or veneer are more prone to denting. Fibreboard is less expensive than timber but is not VOC free and is not environmentally friendly.
Installation Systems
Wood can be manufactured with a variety of different installation systems:
1) Tongue-and-groove: One side and one end of the plank has a groove, the other side and end has a tongue. The tongue and groove fit snugly together to form the floor. Floors with a tongue-and-groove can be installed by glue-down (both engineered and solid), floating (engineered only), or nail-down (not recommended for engineered).
2) "Click" systems: there are a number of patented "click" systems that now exist. A "click" floor is similar to tongue-and-groove, but instead of fitting directly into the groove, the board must be angled in to make the curved tongue fit into the groove. This system only exists for engineered wood floor and is designed to be used for floating installations. It is designed for the Do-It-Yourself market.
3) Floor connection system: There are a wide range of connection systems, as most of them are mill-specific manufacturing techniques. The general principle is to have grooves on all four sides of the plank with a separate, unconnected, piece that is inserted into the grooves of two planks to join them. The piece used for the connection can be made from wood, rubber, or plastic. This installation system allows for different materials (ie. wood and metal) to be installed together if they have the same connection system.
Other wood manufacturing styles
Rotary-peel
This process involves treating the wood by boiling the log in water at a certain temperature for an allotted amount of time. Then after preparation the wood is peeled by a blade from the outside of the log, and it works its way around the log toward the center, creating a wood veneer. This veneer is then pressed flat with high pressure to make the veneer flat. This style of manufacturing tends to have problems with the wood cupping or curling back to its original shape. This problem is commonly known as "face checking" and is a manufacturing defect. Rotary-peeled engineered hardwoods tend to have a plywood appearance in the grain.
Sliced-peel
This process involves the same treatment process that the rotary peel uses. However instead of being sliced in a rotary fashion, this style of wood is sliced from the end of a log. From there it goes through the same manufacturing process as a rotary peeled product. However this style of engineered hardwood tends to have less problems with "face checking" and also does not have the same plywood appearance in the grain. However, this product can tend to have edge splintering and cracking due to the fact it has been submersed in water and then pressed flat.
Dry solid-sawn
Instead of boiling the hardwood logs, in this process they are kept at a low humidity level and dried slowly to keep moisture from inside of the wood cells. The manufacturing process to get this top veneer layer is similar to how a solid hardwood is manufactured. This style of engineered hardwood has the same look as solid hardwood, and does not have any of the potential problems of "face checking" that rotary- and slice-peel products have, because the product is not being exposed to added moisture.
Floor Finishing, Refinishing, and Sanding
Sanding provides a method for smoothing an installed floor, compensating for unevenness of the subfloor. Additionally, sanding is used to renew the appearance of older floo
Hardwood Floor Made of Real Oak, Prefinished Hardwood Flooring UK
UK hardwood flooring supplier offering discounts online on real oak hardwood floors in prefinished and other designs.
Flooring, Wood Flooring, Laminate Floors, Solid Oak Wooden Floor
Wooden flooring online, discounted Quick Step and Balterio laminate flooring, tiles and sheet vinyl, engineered or solid wood floors made of oak, walnut and other hardwood species.
Empire Today - Hardwood Floors: Traditional and Specialty Hardwood ...
Browse Empire Today's line of hardwood flooring, including traditional and specialty hardwood floors available for an in-home product quote, demonstration and next day installation
Hardwood Flooring | Toronto Hardwood Flooring | Hardwood Toronto ...
Wholesaler Now Open to Public, Best Quality Maple, Jatoba, Oak many more Toronto GTA 416-747-0740
Grigore's Hardwood Flooring - Hardwood Installation, Repair and ...
Grigore's Hardwood Flooring provides Knoxville with the best hardwood flooring, refinishing, and repair service available. We use a dust free system for sanding and water based ...
Hardwood Flooring from Carpet One Floor & Home
We have hardwood flooring in a wide variety of styles to make your home a showcase. Let Carpet One's experts guide your hardwood flooring choice & installation options.
Hardwood Flooring | Laminate Floors | Bamboo Flooring
Our floor store offers custom floors as well as hardwood, laminate and bamboo flooring to give your room a unique look and it will save you up to 73% from the original price.
Hardwood Floor Prefinished / Veneered, Discount Hardwood Flooring
Unfinished, lacquered or oiled hardwood floors online, buy cheap hard wood flooring from European manufacturers.
Laminate Flooring : Cork Flooring : Bamboo Flooring : Wood Flooring ...
Simplefloors.com will help you find the best Laminate Flooring, Cork Flooring, Bamboo Flooring, Wood Flooring and Hardwood Floors.
Flooring, Hardwood Floors, Exotic, Durable Wood
Because of rocket science-like advances in wood finishing technology, today’s hardwood flooring is more durable and easy to maintain than ever before.